Inspection & Quote
Your Premier Source For USA Manufactured Bearings.
At BSC, full inspection reports are provided to the customer with serial numbers, damage modes, incoming critical dimensions, manufacturers’ specification dimensions, and disposition of level of repair required to restore the bearing back to manufacturers’ specification. A repair quote is provided to the customer and work does not proceed until a purchase order is received.
BSC can provide a preliminary estimate for bearing modification or bearing repair by providing the bearing part number or the brand, type, and dimensions. More accurate preliminary quotes are available through on-site inspections by a BSC representative.
Disassembly, Cleaning, and Inspection at BSC
BSC will provide a free inspection and quote as a complementary service. The bearing will be carefully disassembled and thoroughly cleaned. Every critical dimension will be measured and compared to the manufacturers’ specification. Damage modes will be identified to help determine the root cause of any fatigue present.
Inbound Inspection Report and Quote Provided to Customer
The customer is always provided with the inbound inspection report and final quote. Work does not proceed until a purchase order is received from the customer. The bearing can be returned to the customer or scrapped upon request at any time. If returned to the customer, freight will be prepaid only for jobs completed.
Once work is complete, each critical dimension is measured and recorded in an outbound inspection report. This outbound inspection report is provided to the customer. BSC provides true start-to-finish inspection reports because we believe that every customer is entitled to comprehensive service and project documentation to ensure excellence in every order.
- Ball Bearings
- Cylindrical Roller Bearings
- Thrust Bearings
- Tension Leveler Units
- Z-Mill Bearings
- Linear Bearings
- Bearing Components
- Specialty Bearings
- Discontinued Bearings
- 2″ ID to 60″ OD
- ABEC 1, ABEC 3, ABEC 5, ABEC 7
- RBEC 1, RBEC 3, RBEC 5, RBEC 7
- P0, P6, P5
BSC is not restricted to a certain grade of steel for bearing manufacturing, and instead, accommodates the requirements for customers’ applications. This includes special tool steels for high-temperature stability as well as corrosion-resistant bearings.
All material certificates are filed in accordance with ISO requirements for future tracking and cross-referencing.